Juanito Sebastian
Arequipa
Summary
To hold a responsible position in the National and International field, in order to increase the profitability of the company I am in. Availability to relocate anywhere in the country. Ability to achieve goals and objectives. All actions I take are based on the values of honesty, continuous improvement, respect, trust, and justice.
Overview
20
20
years of professional experience
Work History
ELECTROMECHANICAL OPERATOR
CUMBRA PERU
06.2022 - 09.2022
- Carrying out assembly work on structures, miscellaneous tasks
- Manufacturing of threaded pipes up to 4" with RIDGID equipment
- Pipe assembly and flange adjustment according to procedure.
ELECTROMECHANICAL ASSEMBLY OPERATOR
CUMBRA
11.2019 - 08.2022
- Performing assembly, pre-assembly, leveling, bolting, torque application, and assembly of frameworks
- Equipment assembly (motors, reducers, centrifugal pumps, etc.) Assembly of frames and rollers (alignment and leveling) Assembly of liners in feed chute Pre-assembly and leveling of structures, conveyor assembly at a height of 20 meters above floor level
- Alignment and verticality of columns according to company standards +/- 3
- Use of hydraulic jacks
- Performed TC bolt torqueing
- Drilling holes with diamond drill and Hilti hammer drill
- Installation of railings with HAZ bolt.
ELECTROMECHANICAL OPERATOR
GYM
03.2017 - 09.2018
- Equipment Assembly (Motors and Gearboxes) Storage Tank Assembly Carrying out structural assembly work at a height of 20 meters above floor level, pre-assembly, leveling, bolting, torque application, and truss assembly
- Pre-assembly and leveling of structures, assembly of conveyor at a height of 20 meters above floor level.
- Modification of new structures, installation of Greetings floors on platforms, use of power and manual tools, as well as impact guns, torque wrenches, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, manual keys, etc.
ELECTROMECHANICAL ASSEMBLY OPERATOR
HAUG: S.A.
10.2016 - 02.2017
- Carrying out pre-assembly work on structures, alignment of structures with topography, and bolt torques according to customer procedures and standards Southern Peru Copper Corporation
- Structural assembly, at a height of 20 meters above floor level in a concentrator plant
- Pre-assembly, leveling, bolting, torque application according to norms and standards of Southern Peru Copper Corporation.
- Modification of new structures, installation of floors on platforms, use of power tools and manuals, as well as torque wrenches, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, manual wrenches, etc.
ELECTROMECHANICAL OPERATOR
HAUG: S.A
11.2016 - 01.2016
- Performing pre-assembly work on structures, aligning structures with topography, and tightening bolts according to client procedures and standards Southern Peru cooper corporation
- Structural assembly, at a height of 20 meters above floor level in a concentrator plant
- Pre-assembly, leveling, bolting, applying torques according to Southern Peru cooper corporation norms and standards
- Modification of new structures, installation of floors Greetings on platforms, use of power tools and manuals, as well as torque wrenches, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, hand wrenches, etc.
ELECTROMECHANICAL ASSEMBLY OPERATOR
BECHTEL- GYM
10.2013 - 10.2015
- Carrying out pre-assembly work on structures, alignment of structures with topography and bolt torques according to BECHTEL procedures and standards
- Structural assembly, at a height of 30 meters above floor level in the concentrator plant
- Assembly of structures carried out with MULTIPLE LIFTING
- American procedure
- Pre-assembly, leveling, bolting, torque application according to BECHTEL standards and norms, and assembly of Staker at a height of 70 meters.
- Modification of new structures, installation of Greetings floors on platforms, use of power and manual tools, such as impact guns, torque wrenches, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, manual wrenches, etc.
Group Leader
LyJ INGENIEROS S.A.C.
04.2013 - 06.2013
- Carrying out assembly work for sample display, logging, and personnel control.
STRUCTURAL ASSEMBLY OPERATOR
BECHTEL-GYM
09.2012 - 11.2012
- Carrying out structural assembly work at a height of 70 meters above floor level, installation of tension cables at a height of 70 meters above floor level
- Pre-assembly, leveling, bolting, torque application, and assembly of trusses.
- Pre-assembly and leveling of structures, assembly of conveyors at a height of 70 meters above floor level.
- Modification of new structures, installation of Greetings floors on platforms, use of power and manual tools, as well as impact guns, torque wrenches, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, manual wrenches, etc.
STRUCTURAL ASSEMBLY AND ROTATING EQUIPMENT OPERATOR
GYM-COSAPI CONSORTIUM
06.2011 - 04.2012
- Carrying out structural assembly work at a height of 40 meters above floor level, installation of transfer tower at a height of 25 meters above floor level
- Pre-assembly, leveling, bolting, torque application, and assembly of trusses.
- Pre-assembly and leveling of structures, assembly of conveyor at a height of 45 meters above ground level.
- Assembly of discharge chutes and jacketing
- Installation of frames, as well as alignment of impact rollers, unloading and self-feeding, laying of conveyor belts, assembly of winches, installation of conveyor cover
- Assembly and alignment of 200 HP gear motors
- Pre-assembly and mounting of molybdenum cells
- Assembly of rotating equipment and precision leveling
- Modification of new structures, installation of Greetings floors on platforms, use of power and manual tools, as well as impact guns, torque wrenches, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, manual wrenches, etc.
MECHANICAL ASSEMBLY OPERATOR
GYM-COSAPI CONSORTIUM
06.2010 - 12.2011
- Carrying out structural assembly work at a height of 40 meters above ground level, assembly of transfer tower at a height of 25 meters above ground level, pre-assembly and leveling of trusses, pre-assembly and leveling of structures, assembly of conveyor at a height of 45 meters above ground level
- Assembly of discharge chutes and jacketing
- Installation of frames, as well as alignment of impact rollers, unloading and self-feeding, laying of conveyor belts, assembly of winches, installation of conveyor cover
- Assembly and alignment of 200 HP gear motors
- Modification of new structures, installation of Greetings floors on platforms, use of power tools and manuals, as well as impact guns, tachometers, magnetic drills, oxyacetylene and oxygen equipment, angle grinders, manual keys, etc.
Mechanical Officer
GRAMAR E.I.R.L.
10.2009 - 03.2010
- My participation in this project has been as a structural dismantling officer, performing the assembly work of the drum platform, modification of discharge chutes
- Repair and assembly of lattice structures, assembly of chutes, assembly of frames, installation of conveyor belts
- In the Selene Operational Unit HOCHSHILD MINING
- Abancay - Cusco.
Mechanical Officer
GRAMAR E.I.R.L.
10.2009 - 11.2009
- My participation in this project has been as a structural dismantling mechanic, carrying out the assembly of drum platforms, modification of discharge chutes
- Repair and assembly of lattice structures, assembly of chutes, assembly of frames and installation of conveyor belts
- In the Selene Operational Unit HOCHSHILD MINING
- Abancay - Cusco
Mechanical Officer
AID Engineers
06.2009 - 09.2009
- Mechanical Installation of Reinforced Belts
- Participating as an assembly mechanic, performing repair and assembly work on trusses for the assembly of frames and impact and load pulleys
- Work carried out at a height of 30 meters above floor level
- At the Operational Unit
- Shougang Iron Peru
- Marcona.
Assembly Mechanic
VyP ICE. SAC
03.2009 - 07.2009
- In this project, the expansion of the concentrator plant was carried out
- Performing assembly work on flotation cells, assembly of motor reducers, assembly of discharge chutes and placement of jackets, at the Operational Unit
- BATEAS.Caylloma
- Arequipa.
Welder's Assistant
M.I.M SRL
06.2008 - 01.2009
- In this project, my role was to lay out the pipes, manually transport them to the assembly point, grind and support the 12" carbon steel pipes.
Assembly Mechanic
M.I.M SRL
10.2008 - 06.2008
- In this project, the installation of 12-inch carbon steel pipes was carried out in Rio Seco/La Joya.
Grinder's Assistant
TECHINT AC
01.2003 - 06.2003
- Responsible for grinding pipes of different diameters for their respective support and welding.
STRUCTURAL ASSEMBLY GROUP LEADER
INDIGEP SERVICIOS SAC
- Carrying out pipe, portal, and miscellaneous assembly work in the concentrator plant
- Supervising personnel tasks and handling various documentation.
Education
Structures with American System (Multiple Lifting) -
06.2014
Basic Course I of the International Code for the Protection of Ships and Port Facilities -
SHOUGANG HIERRO PERÚ S.A.A. Company
07.2009
General Induction of Safety and Mining Hygiene -
ISEM Mining Safety Institute
Principles and Concepts of Structure Assembly -
Knowledge of Sub-part R- Structures and Riggers -
Signals and Hands -
Training of the Transcendent Leader -
Specialization Diplomas in Industrial Safety -
Specialization Diplomas in Mining Safety -
Skills
- Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times
Position
STRUCTURAL ASSEMBLY OPERATOR
Identification
43287794, 120372737
Timeline
ELECTROMECHANICAL OPERATOR
CUMBRA PERU
06.2022 - 09.2022
ELECTROMECHANICAL ASSEMBLY OPERATOR
CUMBRA
11.2019 - 08.2022
ELECTROMECHANICAL OPERATOR
GYM
03.2017 - 09.2018
ELECTROMECHANICAL OPERATOR
HAUG: S.A
11.2016 - 01.2016
ELECTROMECHANICAL ASSEMBLY OPERATOR
HAUG: S.A.
10.2016 - 02.2017
ELECTROMECHANICAL ASSEMBLY OPERATOR
BECHTEL- GYM
10.2013 - 10.2015
Group Leader
LyJ INGENIEROS S.A.C.
04.2013 - 06.2013
STRUCTURAL ASSEMBLY OPERATOR
BECHTEL-GYM
09.2012 - 11.2012
STRUCTURAL ASSEMBLY AND ROTATING EQUIPMENT OPERATOR
GYM-COSAPI CONSORTIUM
06.2011 - 04.2012
MECHANICAL ASSEMBLY OPERATOR
GYM-COSAPI CONSORTIUM
06.2010 - 12.2011
Mechanical Officer
GRAMAR E.I.R.L.
10.2009 - 11.2009
Mechanical Officer
GRAMAR E.I.R.L.
10.2009 - 03.2010
Mechanical Officer
AID Engineers
06.2009 - 09.2009
Assembly Mechanic
VyP ICE. SAC
03.2009 - 07.2009
Assembly Mechanic
M.I.M SRL
10.2008 - 06.2008
Welder's Assistant
M.I.M SRL
06.2008 - 01.2009
Grinder's Assistant
TECHINT AC
01.2003 - 06.2003
STRUCTURAL ASSEMBLY GROUP LEADER
INDIGEP SERVICIOS SAC
Structures with American System (Multiple Lifting) -
Basic Course I of the International Code for the Protection of Ships and Port Facilities -
SHOUGANG HIERRO PERÚ S.A.A. Company
General Induction of Safety and Mining Hygiene -
ISEM Mining Safety Institute
Principles and Concepts of Structure Assembly -
Knowledge of Sub-part R- Structures and Riggers -
Signals and Hands -
Training of the Transcendent Leader -
Specialization Diplomas in Industrial Safety -
Specialization Diplomas in Mining Safety -
Similar Profiles
Carlos Homero Lanza PalominoCarlos Homero Lanza Palomino
Oficial Carpintero at CUMBRA PERU SACOficial Carpintero at CUMBRA PERU SAC
GABRIELA ALVAREZ MONTEROGABRIELA ALVAREZ MONTERO
Production Engineer at CUMBRA PERU S.A.Production Engineer at CUMBRA PERU S.A.
ARTUR PAIVA TINAARTUR PAIVA TINA
Electricista industrial at intipinku -consorcio cumbraElectricista industrial at intipinku -consorcio cumbra
Gustavo Adolfo Vizcarra CardenasGustavo Adolfo Vizcarra Cardenas
Publicista at DiseñadorPublicista at Diseñador
PATRICK SILVA BRACAMONTEPATRICK SILVA BRACAMONTE
Gerente Nacional De Negocios Food Service Y Supermercados at CORPORACION RICO SACGerente Nacional De Negocios Food Service Y Supermercados at CORPORACION RICO SAC